Made in the USA
Tilt Cylinder replacement for Bobcat equipment
Aftermarket hydraulic tilt cylinder replacing Bobcat part 7235738. The listed equipment models and cylinder configurations are shown below.
Specifications
| Replacement part number | 7235738 |
|---|---|
| Equipment manufacturer | Bobcat |
| Part type | Cylinder |
| Cylinder application | Tilt |
| Listed cylinder bore diameter | 3 in |
| Listed cylinder rod diameters | 1.5 in, 1.625 in; varies by fitment |
Listed fitments and configuration notes
| Manufacturer | Model or application | Cylinder type | Rod diameter | Bore diameter | Fitment notes |
|---|---|---|---|---|---|
| Bobcat | A770 | Tilt | 1.5 in | 3 in | Left hand |
| Bobcat | A770 | Tilt | 1.625 in | 3 in | 20.33" End of barrel to center of pin hole/Must order both |
| Bobcat | S630 | Tilt | 1.5 in | 3 in | Left hand/ with piston collar |
| Bobcat | S630 | Tilt | 1.625 in | 3 in | 20.33" End of barrel to center of pin hole/Must order both |
| Bobcat | S650 | Tilt | 1.5 in | 3 in | Left hand/ with piston collar |
| Bobcat | S650 | Tilt | 1.625 in | 3 in | 20.33" End of barrel to center of pin hole/Must order both |
| Bobcat | S740 | Tilt | 1.5 in | 3 in | Left hand |
| Bobcat | S750, S770 | Tilt | 1.5 in | 3 in | Left hand/ with piston collar |
| Bobcat | S750, S770 | Tilt | 1.625 in | 3 in | 20.33" End of barrel to center of pin hole/Must order both |
| Bobcat | T630 | Tilt | 1.5 in | 3 in | Left hand/ with piston collar |
| Bobcat | T630 | Tilt | 1.625 in | 3 in | 20.33" End of barrel to center of pin hole/Must order both |
| Bobcat | T650 | Tilt | 1.5 in | 3 in | Left hand/ with piston collar |
| Bobcat | T650 | Tilt | 1.625 in | 3 in | 20.33" End of barrel to center of pin hole/Must order both |
| Bobcat | T740 | Tilt | 1.5 in | 3 in | Left hand |
| Bobcat | T750, T770 | Tilt | 1.5 in | 3 in | Left hand/ with piston collar |
| Bobcat | T750, T770 | Tilt | 1.625 in | 3 in | 20.33" End of barrel to center of pin hole/Must order both |
Confirm fit before ordering
Check the replacement part number against your existing part or equipment parts information. Match the cylinder application and any serial-number, date, left/right or configuration notes in the table. Model name alone may not identify the correct replacement.
Confirm mounting points, port locations and overall cylinder dimensions before ordering.
Need help matching your part? Contact Johnson Hydraulic Sales with your equipment model, serial number, part number and photos.
Aftermarket replacement for Bobcat equipment; not an equipment-manufacturer-branded OEM part. Representative image; actual appearance and details may vary.